Archive for the ‘System Tricks’ Category

Kill Processes from Command Prompt

Posted: August 22, 2009 in System Tricks, Tweaking, Vista, Windows XP
Tags:
0


I’m sure you are familiar with the traditional way to kill or end a process in Windowsusing Task Manager.  This method is effective but not nearly as fun as killing a process in Command Prompt.  Additionally, killing processes in Command Prompt provides much more control and the ability to end multiple processes at once.

All of this is possible with the TaskKill command. First, let’s cover the basics.  You can kill a process by the process ID (PID) or by image name (EXE filename).

Open up an Administrative level Command Prompt and run tasklist to see all of the running processes:

C:\>tasklist

Image Name                     PID Session Name        Mem Usage
========================= ======== ================ ============
firefox.exe                  26356 Console             139,352 K
regedit.exe                  24244 Console               9,768 K
cmd.exe                      18664 Console               2,380 K
conhost.exe                   2528 Console               7,852 K
notepad.exe                  17364 Console               7,892 K
notepad.exe                  24696 Console              22,028 K
notepad.exe                  25304 Console               5,852 K
explorer.exe                  2864 Console              72,232 K

In the example above you can see the image name and the PID for each process. If you want to kill the firefox process run:

C:\>Taskkill /IM firefox.exe /F

or

C:\>Taskkill /PID 26356 /F

The /f flag is kills the process forcefully.  Failure to use the /F flag will result in nothing happening in some cases.  One example is whenever I want to kill the explorer.exe process I have to use the /F flag or else the process just does not terminate.

If you have multiple instances of an image open such as multiple firefox.exe processes, running the taskkill /IM firefox.exe command will kill all instances. When you specify the PID only the specific instane of firefox will be terminated.

The real power of taskkill are the filtering options that allow you to use the following variables and operators.

Variables:

  • STATUS
  • IMAGENAME
  • PID
  • SESSION
  • CPUTIME
  • MEMUSAGE
  • USERNAME
  • MODULES
  • SERVICES
  • WINDOWTITLE

Operators:

  • eq (equals)
  • ne (not equal)
  • gt (greater than)
  • lt (less than)
  • ge (greater than or equal)
  • le (less than or equal)

“*” is the wildcard.

You can use the variables and operators with the /FI filtering flag.  For example, let’s say you want to end all processes that have a window title that starts with “Internet”:

C:\>taskkill /FI “WINDOWTITLE eq Internet*” /F

How about killing all processes running under the Steve account:

C:\>taskkill /FI “USERNAME eq Ignited” /F

It is also possible to kill a process running on a remote computer with taskkill.  Just run the following to kill notepad.exe on a remote computer called IgnitedDesktop:

C:\>taskkill /S IgnitedDesktop /U RemoteAccountName /P RemoteAccountPassword /IM notepad.exe /F

To learn more about taskkill run it with the /? command just like any other Windows command.

Create One-Click Shutdown and Reboot Shortcuts

Posted: August 20, 2009 in System Basics, System Information, System Tricks, Tricks
1


Create One-Click Shutdown and Reboot Shortcuts:

First, create a shortcut on your desktop by right-clicking on the desktop, choosing New, and then choosing Shortcut. The Create Shortcut Wizard appears. In the box asking for the location of the shortcut, type shutdown. After you create the shortcut, double-clicking on it will shut down your PC.

But you can do much more with a shutdown shortcut than merely shut down your PC. You can add any combination of several switches to do extra duty, like this:

shutdown -r -t 01 -c “Rebooting your PC”

Double-clicking on that shortcut will reboot your PC after a one-second delay and display the message “Rebooting your PC.” The shutdown command includes a variety of switches you can use to customize it. Table 1-3 lists all of them and describes their use.

I use this technique to create two shutdown shortcuts on my desktop—one for turning off my PC, and one for rebooting. Here are the ones I use:

shutdown -s -t 03 -c “Bye Bye m8!”

shutdown -r -t 03 -c “Ill be back m8 ;)!”

Switch

What it does

-s

Shuts down the PC.

-l

Logs off the current user.

-t nn

Indicates the duration of delay, in seconds, before performing the action.

-c “messagetext”

Displays a message in the System Shutdown window. A maximum of 127 characters can be used. The message must be enclosed in quotation marks.

-f

Forces any running applications to shut down.

-r

Reboots the PC.

Keep Folders Hidden

Posted: August 20, 2009 in System Basics, System Tricks, Windows XP
0


Keep Folders Hidden

first create a new folder somewhere on your hard drive

when you name it hold down “Alt” and press “0160” this will create and invisible space so it will apper as if it has no name.

then right click in and select “Properties” select the tab “coustimize” and select “change icon” scroll along and you should a few blanc spaces click on any one and click ok when you hav saved the settings the folder will be invisible to hide all your personal files

Remote Shutdown

Posted: August 20, 2009 in System Tricks, Tricks, Windows XP
0


XP PRO has a lot of fun utilities. One of the most useful ones I have found to date is the ability to remotely reboot a PC. There are 2 ways of doing this. You will need to have admin access to the PC to preform these actions. That being said, here is the first way to do it:

Right click my computer, choose manage.

Highlight the Computer Management (Local) then click on Action, choose connect to another computer.

In the window that opens fill in the machine name of the PC you want to connect to and click ok.

Once connected right click on Computer Management (Remote machine name) and choose properties.

Go to the “Advanced” tab and click the Settings button under Start up and recovery.

Click on the Shutdown button.

Under action choose what you want to do (you can log off current user, shut down, restart, or power down. you can also choose if you want to force all applications to close, close hung apps, or wait for all apps to close by themselves).

The second way… Remember dos… that good old thing. Open up a command prompt and enter in the following:

%windir%\System32\shutdown.exe -r -m \\Machinename. The command prompt has more switches and options. I highly suggest using shutdown.exe /? to see all the posibilities.

Rename “Recycle Bin”

Posted: August 20, 2009 in System Basics, System Tricks, Tricks
Tags:
0


1. Start, Run, ‘Regedit’.

2. Press ‘Ctrl’+’F’ to open find box and type ‘Recycle Bin’ to search.

3. Change any value data with ‘Recycle Bin’ to whatever name you want to give it ( ie, like ‘Trash Can’ or ‘Dump’ etc).

4. Press F3 to continue searching for ‘Recycle Bin’ and change wherever you come across ‘Recycle Bin’ to new its new name.

5. Repeat step 4 until you have finished with searching and changed all values to its new name.

6. Close regedit and hit F5 on desktop to see the new name on screen.

Note: As a good practice, always backup your registry before changing anything although changing ‘Recycle Bin’ name is a simple tweak and doesnt affect anything else.

Disable the Shut Down Button on the Welcome Screen

Posted: August 20, 2009 in System Information, System Tricks, Tricks, Windows XP
0


Disable the Shut Down Button on the Welcome Screen

Do you have little ones that like to click all over the screen when you’re not

looking? Afraid of someone shutting down the computer without logging on?

· Click Start, click Control Panel, click Performance and Maintenance, and then click

Administrative Tools.

· Double-click Local Security Policy.

· Expand Security Settings, then expand Local Policies, and then click Security

Options.

· In the right pane, double-click the Shutdown: Allow system to be shut down without

having to log on policy, click the Disabled radio button, and then click OK.

No more shutting down without logging on!

Disable Error Reporting

Posted: August 20, 2009 in System Information, System Tricks, Windows XP
0


Disable Error Reporting

You can get rid of the Windows XP error report messages if you don’t want to send

another one in.

· Click Start, and then click Run.

· Type msconfig to open the System Configuration Utility.

· Click the Services tab.

· Clear the Error Reporting Service check box, and then click OK.

· Hit Restart to reboot your system.

Your computer will now start without loading the error reporting service.

Enabling Task Manager if it is Disable

Posted: August 20, 2009 in Registry, System Information, System Tricks, Tricks
Tags:
0

Step no. 1

1. Go to Start -> Run -> Write regedit and press on Enter button.

2. Navigate to the following registry keys and verity that following settings set to default:

Windows Registry Editor Version 5.00
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
“DisableTaskMgr”=dword:00000000
[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Group Policy Objects\LocalUser\Software\Microsoft\Windows\CurrentVersion\Policies\System]
“DisableTaskMgr”=dword:00000000

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\system\]
“DisableTaskMgr”=dword:00000000
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon]
“DisableCAD”=dword:000000003. Reboot the computer.
Step no. 2
1. Go to Start – Run -> Write Gpedit.msc and press on Enter button.

2. Navigate to User Configuration – Administrative Templates -> System – Ctrl+Alt+Del Option

3. In the right side of the screen verity that Remove Task Manager option set to Disable or Not Configured.

4. Close Gpedit.msc

5. Go to Start – Run -> Write gpupdate /force and press on Enter button.

Windows XP Tweaking….

Posted: August 18, 2009 in System Tricks, Tricks, Tweaking, Windows XP
1

Win XP Tweaks

———–

STARTUP

———–

Windows Prefetcher

******************

[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ Session Manager \ Memory Management \ PrefetchParameters]

Under this key there is a setting called EnablePrefetcher, the default setting of which is 3. Increasing this number to 5 gives the prefetcher system more system resources to prefetch application data for faster load times. Depending on the number of boot processes you run on your computer, you may get benefits from settings up to 9. However, I do not have any substantive research data on settings above 5 so I cannot verify the benefits of a higher setting. This setting also may effect the loading times of your most frequently launched applications. This setting will not take effect until after you reboot your system.

Master File Table Zone Reservation

**********************************

[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ FileSystem]

Under this key there is a setting called NtfsMftZoneReservation, the default setting of which is 1. The range of this value is from 1 to 4. The default setting reserves one-eighth of the volume for the MFT. A setting of 2 reserves one-quarter of the volume for the MFT. A setting of 3 for NtfsMftZoneReservation reserves three-eighths of the volume for the MFT and setting it to 4 reserves half of the volume for the MFT. Most users will never exceed one-quarter of the volume. I recommend a setting of 2 for most users. This allows for a “moderate number of files” commensurate with the number of small files included in most computer games and applications. Reboot after applying this tweak.

Optimize Boot Files

*******************

[HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Dfrg \ BootOptimizeFunction]

Under this key is a text value named Enable. A value of Y for this setting enables the boot files defragmenter. This setting defragments the boot files and may move the boot files to the beginning (fastest) part of the partition, but that last statement is unverified. Reboot after applying this tweak.

Optimizing Startup Programs [msconfig]

**************************************

MSConfig, similar to the application included in Win9x of the same name, allows the user to fine tune the applications that are launched at startup without forcing the user to delve deep into the registry. To disable some of the applications launched, load msconfig.exe from the run command line, and go to the Startup tab. From there, un-ticking the checkbox next to a startup item will stop it from launching. There are a few application that you will never want to disable (ctfmon comes to mind), but for the most part the best settings vary greatly from system to system.

As a good rule of thumb, though, it is unlikely that you will want to disable anything in the Windows directory (unless it’s a third-party program that was incorrectly installed into the Windows directory), nor will you want to disable anything directly relating to your system hardware. The only exception to this is when you are dealing with software, which does not give you any added benefits (some OEM dealers load your system up with software you do not need). The nice part of msconfig is that it does not delete any of the settings, it simply disables them, and so you can go back and restart a startup application if you find that you need it. This optimization won’t take effect until after a reboot.

Bootvis Application

*******************

The program was designed by Microsoft to enable Windows XP to cold boot in 30 seconds, return from hibernation in 20 seconds, and return from standby in 10 seconds. Bootvis has two extremely useful features. First, it can be used to optimize the boot process on your computer automatically. Second, it can be used to analyze the boot process for specific subsystems that are having difficulty loading. The first process specifically targets the prefetching subsystem, as well as the layout of boot files on the disk. When both of these systems are optimized, it can result in a significant reduction in the time it takes for the computer to boot.

Before attempting to use Bootvis to analyze or optimize the boot performance of your system, make sure that the task scheduler service has been enabled – the program requires the service to run properly. Also, close all open programs as well – using the software requires a reboot.

To use the software to optimize your system startup, first start with a full analysis of a fresh boot. Start Bootvis, go to the Tools menu, and select next boot. Set the Trace Repetition Settings to 2 repetitions, Start at 1, and Reboot automatically. Then set the trace into motion. The system will fully reboot twice, and then reopen bootvis and open the second trace file (should have _2 in the name). Analyze the graphs and make any changes that you think are necessary (this is a great tool for determining which startup programs you want to kill using msconfig). Once you have made your optimizations go to the Trace menu, and select the Optimize System item. This will cause the system to reboot and will then make some changes to the file structure on the hard drive (this includes a defragmentation of boot files and a shifting of their location to the fastest portion of the hard disk, as well as some other optimizations). After this is done, once again run a Trace analysis as above, except change the starting number to 3. Once the system has rebooted both times, compare the charts from the second trace to the charts for the fourth trace to show you the time improvement of the system’s boot up.

The standard defragmenter included with Windows XP will not undo the boot optimizations performed by this application.

———————————–

General Performance Tweaks

———————————–

IRQ Priority Tweak

******************

[HKEY_LOCAL_MACHINE \ System \ CurrentControlSet \ Control \ PriorityControl]

You will need to create a new DWORD: IRQ#Priority (where # is the number of the IRQ you want to prioritize) and give it a setting of 1. This setting gives the requisite IRQ channel priority over the other IRQs on a software level. This can be extremely important for functions and hardware subsystems that need real-time access to other parts of the system. There are several different subsystems that might benefit from this tweak. Generally, I recommend giving either the System CMOS or the video card priority. The System CMOS generally has an IRQ setting of 8, and giving it priority enhances the I/O performance of the system. Giving priority to the video card can increase frame rates and make AGP more effective.

You can give several IRQs priority, but I am not entirely certain how the system interacts when several IRQs are given priority – it may cause random instabilities in the system, although it is more likely that there’s a parsing system built into Windows XP to handle such an occurrence. Either way, I would not recommend it.

QoS tweak

*********

QoS (Quality of Service) is a networking subsystem which is supposed to insure that the network runs properly. The problem with the system is that it eats up 20% of the total bandwidth of any networking service on the computer (including your internet connection). If you are running XP Professional, you can disable the bandwidth quota reserved for the system using the Group Policy Editor [gpedit.msc].

You can run the group policy editor from the Run command line. To find the setting, expand “Local Computer Policy” and go to “Administrative Templates” under “Computer Configuration.” Then find the “Network” branch and select “QoS Packet Scheduler.” In the right hand box, double click on the “Limit Reservable Bandwidth.” From within the Settings tab, enable the setting and then go into the “Bandwidth Limit %” and set it to 0%. The reason for this is that if you disable this setting, the computer defaults to 20%. This is true even when you aren’t using QoS.

Free Idle Tasks Tweak

*********************

This tweak will free up processing time from any idle processes and allow it to be used by the foreground application. It is useful particularly if you are running a game or other 3D application. Create a new shortcut to “Rundll32.exe advapi32.dll,ProcessIdleTasks” and place it on your desktop. Double-click on it anytime you need all of your processing power, before opening the application.

Windows Indexing Services

Windows Indexing Services creates a searchable database that makes system searches for words and files progress much faster – however, it takes an enormous amount of hard drive space as well as a significant amount of extra CPU cycles to maintain the system. Most users will want to disable this service to release the resources for use by the system. To turn off indexing, open My Computer and right click on the drive on which you wish to disable the Indexing Service. Enter the drive’s properties and under the general tab, untick the box for “Allow the Indexing Service to index this disk for fast file searching.”

Priority Tweak

**************

[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ PriorityControl]

This setting effectively runs each instance of an application in its own process for significantly faster application performance and greater stability. This is extremely useful for users with stability problems, as it can isolate specific instances of a program so as not to bring down the entire application. And, it is particularly useful for users of Internet Explorer, for if a rogue web page crashes your browser window, it does not bring the other browser windows down with it. It has a similar effect on any software package where multiple instances might be running at once, such as Microsoft Word. The only problem is that this takes up significantly more memory, because such instances of a program cannot share information that is in active memory (many DLLs and such will have to be loaded into memory multiple times). Because of this, it is not recommended for anyone with less than 512 MB of RAM, unless they are running beta software (or have some other reason for needing the added stability).

There are two parts to this tweak. First is to optimize XP’s priority control for the processes. Browse to HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ PriorityControl and set the “Win32PrioritySeparation” DWORD to 38. Next, go into My Computer and under Tools, open the Folder Options menu. Select the View tab and check the “Launch folder windows in separate process” box. This setting actually forces each window into its own memory tread and gives it a separate process priority.

Powertweak application

**********************

xxx.powertweak.com

Powertweak is an application, which acts much like a driver for our chipsets. It optimizes the communication between the chipset and the CPU, and unlocks several “hidden” features of the chipset that can increase the speed of the system. Specifically, it tweaks the internal registers of the chipset and processor that the BIOS does not for better communication performance between subsystems. Supported CPUs and chipsets can see a significant increase in I/O bandwidth, increasing the speed of the entire system. Currently the application supports most popular CPUs and chipsets, although you will need to check the website for your specific processor/chipset combo – the programmer is working on integrating even more chipsets and CPUs into the software.

Offload Network Task Processing onto the Network Card

*****************************************************

[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Tcpip \ Parameters]

Many newer network cards have the ability of taking some of the network processing load off of the processor and performing it right on the card (much like Hardware T&L on most new video cards). This can significantly lower the CPU processes needed to maintain a network connection, freeing up that processor time for other tasks. This does not work on all cards, and it can cause network connectivity problems on systems where the service is enabled but unsupported, so please check with your NIC manufacturer prior to enabling this tweak. Find the DWORD “DisableTaskOffload” and set the value to 0 (the default value is 1). If the key is not already available, create it.

Force XP to Unload DLLs

***********************

[HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer]

“AlwaysUnloadDLL”=dword:00000001

XP has a bad habit of keeping dynamic link libraries that are no longer in use resident in memory. Not only do the DLLs use up precious memory space, but they also tend to cause stability problems in some systems. To force XP to unload any DLLs in memory when the application that called them is no longer in memory, browse to HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Explorer and find the DWORD “AlwaysUnloadDLL”. You may need to create this key. Set the value to 1 to force the operating system to unload DLLs.

Give 16-bit apps their own separate processes

*********************************************

[HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ WOW]

“DefaultSeparateVDM”=”Yes”

By default, Windows XP will only open one 16-bit process and cram all 16-bit apps running on the system at a given time into that process. This simulates how MS-DOS based systems viewed systems and is necessary for some older applications that run together and share resources. However, most 16-bit applications work perfectly well by themselves and would benefit from the added performance and stability of their own dedicated resources. To force Windows XP to give each 16-bit application it’s own resources, browse to HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Control \ WOW and find the String “DefaultSeparateVDM”. If it is not there, you may need to create it. Set the value of this to Yes to give each 16-bit application its own process, and No to have the 16-bit application all run in the same memory space.

Disable User Tracking

*********************

[HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer]

“NoInstrumentation”=dword:00000001

The user tracking system built into Windows XP is useless to 99% of users (there are very few uses for the information collected other than for a very nosy system admin), and it uses up precious resources to boot, so it makes sense to disable this “feature” of Windows XP. To do so, browse to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Policies \ Explorer and find the DWORD “NoInstrumentation”. You may need to create this key if it is not there. The default setting is 0, but setting it to 1 will disable most of the user tracking features of the system.

Thumbnail Cache

***************

[HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Advanced]

“DisableThumbnailCache”=dword:00000001

Windows XP has a neat feature for graphic and video files that creates a “thumbnail” of the image or first frame of the video and makes it into an oversized icon for the file. There are two ways that Explorer can do this, it can create them fresh each time you access the folder or it can load them from a thumbnail cache. The thumbnail caches on systems with a large number of image and video files can become staggeringly large. To disable the Thumbnail Cache, browse to HKEY_CURRENT_USER \ Software \ Microsoft \ Windows \ CurrentVersion \ Explorer \ Advanced and find the DWORD “DisableThumbnailCache”. You may need to create this key. A setting of 1 is recommended for systems where the number of graphic and video files is large, and a setting of 0 is recommended for systems not concerned about hard drive space, as loading the files from the cache is significantly quicker than creating them from scratch each time a folder is accessed.

Increase your netspeed

Posted: August 18, 2009 in Hack, Internet, System Information, System Tricks
0

Increase your Netspeed

go to desktop->My computer-(right click on)->manage->->Device manager-> now u see a window of Device manager
then go to Ports->Communication Port(double click on it and Open).
after open u can see a Communication Port properties.
go the Port Setting:—-
and now increase ur “Bits per second” to 128000.
and “Flow control” change 2 Hardware.

U WILL NOTICE AN IMMEDIATE RESULT

this will increase the receiving capacity of your input port and thus ur netspeed will be increased

Older Entries
Newer Entries