Posts Tagged ‘XP’

Because of the security features built into Windows XP, it is virtually impossible to get back into the system without the password.

You have several options to try and get around this problem.

If you have access to another user account with administrator rights, you can use that account to change the password

of the account that is locked out. You can also use the default Administrator account that is built into Windows XP.

First you need to boot the system into Safe Mode.

1.Restart your system.

2.When you see the blue Dell globe or screen, press the ( F8 ) key about 3 times a second.

3.You should get the Windows startup menu. Use the (Up or Down) arrow keys to highlight (SafeMode)

4.Press (Enter) on (Safe Mode), then press (Enter) on (Windows XP).

5.The system should boot to Safe Mode.

Once you are at the Account Log on Screen, click on the icon

for the user account with administrator rights, or click on the icon

for the administrators account.

Note: For Home the Administrator account isn’t normally shown & in Safe Mode you have to press Ctrl+Alt+Delete keys twice to show.

For PRO you can do this in normal mode

When the system has booted to the desktop, use the following steps to change the accounts password.

1.Click Start, Control Panel, Administrative Tools.

2.Click Computer Management.

3.Double click Local Users and Groups, double click the folder Users.

4.Right click on the account name that is locked out, and click on Set Password.

5.You may get a warning message about changing the password, simply click proceed.

6.Leave the New Password box blank, also leave the Confirm Password box blank.

7.Click OK, and OK again.

8.Then close all Windows, reboot the system and try to log in.

There are also applications that can recover the password for you.

The following companies provide these applications at a cost.

iOpus® Password Recovery XP here.

Asterisk Password Recovery XP v1.89 here.

If the above information does not help in recovering the password, the only option left is to

format the hard drive then reinstall Windows and the system software.

Follow the following steps

1. Open notepad.exe, type “del c:\windows\prefetch\ntosboot-*.* /q” (without the quotes) & save as “ntosboot.bat” in c:\

2. From the Start menu, select “Run…” & type “gpedit.msc”.

3. Double click “Windows Settings” under “Computer Configuration” and double click again on “Shutdown” in the right window.

4. In the new window, click “add”, “Browse”, locate your “ntosboot.bat” file & click “Open”.

5. Click “OK”, “Apply” & “OK” once again to exit.

6. From the Start menu, select “Run…” & type “devmgmt.msc”.

7. Double click on “IDE ATA/ATAPI controllers”

8. Right click on “Primary IDE Channel” and select “Properties”.

9. Select the “Advanced Settings” tab then on the device or 1 that doesn’t have ‘device type’ greyed out select ‘none’ instead of ‘autodetect’ & click “OK”.

10. Right click on “Secondary IDE channel”, select “Properties” and repeat step 9.

11. Reboot your computer.

Windows XP comes both IPv4 and IPv6 support.

To enable IPv6, you can install the

protocols needed with the command “ipv6 install” in the command-prompt.

Then type ipv6 /? to see the options.

The installation will not remove the IPv4 protocols so your

current configuration will still work.